Car stereos are installed in cars to make the driving comfortable and enjoyable. For most of the population today a car stereo is a vital element of their car. They are placed at the heart of the car audio system and are nicely shaped and fitted as to match the interiors of the car.
How to take off an Installed Car Stereo
Now, it may sometimes happen that rather than using the installation installed car stereo year after year, population may want to try a good potential system. But lack of knowledge about the definite ways of removing an installed car stereo can prove to be a hindrance. However, in this case it should be mentioned that though removing an installed car stereo is not a tough job yet it needs caution since the process is technical.
The process of removing an installed car stereo depends in general on the type of the stereo and the type of the car. Generally, there are two main ways to take off a car stereo, the spring mounted clips and bolt-on. In the first, the stereo is held in place by 4 small clips, so that the stereo does not slide out of the dash. The tools requisite to take off it are a pair of Din tools that are regularly U-shaped. And at the top of the U there are small poles that fix the clips to the stereo. After inserting properly, there will be a click sound and the stereo will simply slide out of the dash.
There are car stereos that are attached to the dash and then it will be a bit difficult to get it out. However, there aren't special tools for the uninstalling process. There are brackets bolted to the car. They are sometimes mounted to the stereo to bring some difference in the method. However, to access the screws or the bolts that hold the stereo in the place, a few trims have to be removed. And one has to be faithful while removing them. That is the essence of the bolt-on method.
There are basically one or two trim pieces that surround the face of the stereo. And to take off it the screws that are regularly private from normal view have to be detached. Infact, there are some private clips which have to be taken care of while removing the trim. In this case, extraction tools can be used.
Now once the trims are removed we should take off the screws or bolts holding it in place. When they too are removed, the stereo will slide out of the dash.
Then you should disconnect the electrical connectors at the back of the stereo, by unscrewing the antenna cable at first. Actually, the antenna cable is the furthest relationship near the passenger side. The next step is removing the power connection. Finally, you must take off the wiring harness connector from the back of the stereo. Now, as all the electrical connections are removed from the back of the stereo, the car stereo is removed completely. These are basic instructions about removing an installed car stereo. In the case of any complication you should give a call to the service town and get master guidance.
How to take off an Installed Car Stereo
See Also : timex
